Do not select a machine on maximum wattage, number of modes, touchscreen size, cabinet appearance, lowest price, free attachments, verbal FDA claims or treatment videos.
1. Define the procedures first
Write down the procedures you intend to offer and who in your clinic is qualified to perform them. That decides which modes and handpieces you need, which decides the machine — not the other way round.
2. Identify the laser source
Ask for the source manufacturer, model, type, serial number, rated output and date of manufacture, plus the warranty on the source specifically and the replacement process.
3. Measure the output, do not accept the screen
- Ask for output measured with a calibrated laser power or energy meter
- Confirm whether pulse modes come from the source or from software
- Ask for the pulse duration to be stated and shown as stable
- Watch the machine after warm-up and from cold
- Ask what calibration process exists and who performs it
4. Inspect the optical path
Move the articulated arm through its full range and check beam consistency at several positions. Ask about mirror access, replacement mirrors and alignment service, then check the scanner: pattern accuracy, motor stability, lens and board availability, calibration and replacement cost. The full inspection list.
5. Check the safety chain
Emergency stop, key control, interlock compatibility, emission indicators, fault reporting, eyewear and plume evacuation — demonstrated, not described. Safety features in detail.
6. Match the documentation to the model
Regulatory status is held per model. The manufacturer of the platform we supply holds US FDA 510(k) clearance K211735 for its CO2 laser machine, listed as a Class II powered laser surgical instrument under product code GEX, 21 CFR 878.4810.
7. Get the commercial terms in writing
- The exact model and serial number
- The laser source make, model and serial number
- Every included handpiece and attachment, named
- The written warranty and, specifically, its exclusions
- Whether the source, scanner, arm, mirrors and lens are covered
- Who pays freight on an in-warranty repair
- Installation and training scope
- Consumable and spare-part price lists
- Who the attending engineer is and what the response time is
Frequently Asked Questions
What should I check first when buying a CO2 fractional laser?
The procedures you intend to offer and who is qualified to perform them. That decides the modes and handpieces, which decides the machine.
How do I verify a power claim?
Ask for the source manufacturer, model and serial number, and for the output to be measured with a calibrated laser power or energy meter - from cold and after warm-up.
What does FDA clearance mean here?
A Class II device is cleared through a 510(k) submission, not approved. The manufacturer of the platform we supply holds clearance K211735 for its CO2 laser machine under product code GEX, 21 CFR 878.4810. Clearance is held per model.
What is included with a machine from Beauty Flex?
Pan-India delivery, typically 5-6 days depending on pincode with live tracking; operational training, with academic training available at extra charge; and lifetime spare-part support, with parts chargeable. Installation terms vary by machine.
Is EMI available?
EMI is available by credit card only, and charges apply.